Proposed printer setup

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Proposed printer setup

McHenry
Would this work?

We have a number of workstations each with it's own printer.

Following option B on this guide:
https://github.com/Thinstation/thinstation/wiki/Printer-configuration

I had proposed the following:

Set the generic printer settings in thinstation.build-network that will be applied to all thinstation clients on the LAN and set the individual DEVICEURLs in conf files specific to the thin client.

# thinstation.build-network
CUPS_PRINTER_0_NAME="sample network printer 0"
CUPS_PRINTER_0_DRIVER="drv:///sample.drv/generpcl.ppd"

# thinstation.build-192.168.1.20
CUPS_PRINTER_0_DEVICEURI="socket://192.168.1.40"

This way each of the thin clients will ahve the same printer config with each having a unique DEVICEURL

------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports. http://sdm.link/zohomanageengine
_______________________________________________
Thinstation-general mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/thinstation-general